Plastic, SMC and Fiberglass Repair

Product and Description	Part # and Price	View your Cart You can change quantities here
Duramix Applicator Gun must be used on Duramix products.	DRM 4997 $82.17
Flexible Plastic Repair - Flexible urethane repair material for repairs on non-TPO flexible bumpers or parts. Sets within 1 minute and sands easily after 15 minutes. Will not peel back when sanded. 6 oz.	DRM 4030 $30.85
Duramix Super Fast Adhesive - Does not require a separate accelerator like cyanacrylate adhesives. Will not run or sag and has excellent wide gap filling capabilities. Withstands a wide range of temperatures. Work time is 20 seconds, bonds in 30 seconds. 6 oz.	DRM 4747 $16.66
Semi-Rigid Plastic Repair - Semi-rigid urethane material for repairing Xenoy, HPA, ABS, PPO, SAN,PA, GTX, UP, SRIM, RRIM and other semi-rigid plastic parts and bumper covers. Sets within 1 minute, sand after 15. 6 oz.	DRM 4040 $30.69
Skimcoat Plastics Filler - For back-filling pinholes in repair areas of urethane or TPO plastic bumpers and panels. 6 oz.	DRM 4058 $30.69
SMC Fiberglass Backer Repair - Fast set rigid urethane material for quick bonding of flexible fiberglass laminates and light cure backer laminates when contouring and shaping is required. Work time is 50 seconds, bonds in 5 minutes. 6 oz.	DRM 4050 $30.69
Fiberglass Panel Splicing Adhesive - Semi-rigid adhesive for splicing and bonding SMC/fiberglass backer panels. Ideal for reinforcing crushed or punctured fiberglass. Work time is 3 minutes, bonds in 5. 6 oz.	DRM 4154 $30.69

Description All Lord Fusor product set times are based on 70 degree temperatures. Set times may be decreased by using heat.	Part # and Price	View your Cart You can change quantities here
Lord Fusor Applicator Gun must be used on Fusor products.	LFR 301 $31.22
EZ Plastic Repair Adhesive (Heat Set) - High performance repair material for structural and cosmetic repair of all types of rigid body plastics, body panels, hoods, decks and doors. 10.1 oz. cartridge with 2 mixers.	LFR 100EZ $37.31
Plastic Body Cosmetic Repair Adhesive (Fast-Set) - Repair scratches and gouges on rigid plastics, SMC, fiberglass and GTX. Can be used on body panels, hoods, decks, doors and grilles. 7.6 oz. with 3 mixers.	LFR 102 $37.31
Fusor EXtreme Plastic Repair - Used to bond, repair and refinish TPO, TEO, PP, SMC, ABS and FRP. Used on bumpers, emblems, door trims, interior and exterior plastic repairs and minor cosmetic repairs. EXtremely high strength structural adhesive, EXtremely fast set. Work time 1-1/2 minutes, handle in 10 minutes. 10.1 oz. cartridge with 2 mixers. Pretreat bumper surfaces with surface modifier LFR 602.	LFR 142 $37.31
Bumper Repair - same as LFR 142 above, but slower set. Work time 3 to 5 minutes, handle in 3 minutes at 140 degrees. Use Fusor Reinforcing mesh for cracks, LFR 700.	LFR 152 $37.31
Clear Plastic Structural Installation Adhesive (Fast Set) - High strength general purpose urethane structural adhesive for bonding plastics and primed or painted metals. For bonding emblems, body side moldings, rocker panel claddings and moldings, plastic backer panels, decorative vents, wheel opening moldings, bumper tabs, acrylic sun visors, rear wind deflectors, medallions, door edge guards and ground effects. Fast curing, non-sag. 10.1 oz. cartridge with 2 mixers.	LFR 141 $37.31
SMC and Fiberglass Installation Adhesive (Medium Set) - Installation and bonding of SMC, fiberglass, painted and primed metal. For installation and bonding of body panels, spoilers and large ground effects. 10.1 oz. cartridge with 2 mixers.	LFR 147 $37.31
Plastic Installation Adhesive (Slow Set Formula) - Installation of hood panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets and other body panels. 50 to 50 minute work time, handling time is 4 to 5 hours. Paintable in 4 hours at 70 degrees. Includes one mixer. 10.1 oz.	LFR 127EZ $37.31
Bumper Finishing Adhesive (Fast Set) - Finishing adhesive for all plastic bumpers including TPO, TEO, PP and urethane. No need for special pre-treatments or adhesion promoters, no special gun or tips needed. Hand dispensed or convenient caulking gun application. 5.1 oz.	LFR 114 $25.56
Plastic Bumper/Trim Surface Modifier - 24 oz. aerosol can.	LFR 602 $13.59
Fusor Reinforcing mesh for plastic repair - 12' x 4" roll	LFR 700 $11.55
Fusor Plastic Curing Membrane - 12' x 6" roll	LFR 701 $7.05
Fusor Plastic Fiberglass Cloth - 12' x 4" roll	LFR 702 $15.93